Building/GPS Improvements/Changes

[Xeslite 36]

Alrighty. First things first.

The value 0 when using building commands should not be used to "ignore" the value. Instead 0 should counts as the value 0. 
i.e: .gob turn 0 should turn it to degree 0

.gob rotate 0 = 0.xxxxxx (x = random values)

For every time you re-enter the same value into the rotation, the gob's rotation seems to half down depending on how many decimals you entered..

i.e of the issue when using ".gob rot 0 0" 13x times:
Y: -0.372827

Y: -0.185336

Y: -0.092535

Y: -0.046251

Y: -0.023124

Y: -0.011561

Y: -0.005780

Y: -0.002888

Y: -0.001445

Y: -0.000743

Y: -0.000401

Y: -0.000149

Y: -0.000000

No decimals entered should just make it assume that all the non-entered decimals should be zero.

i.e: 

.gob rotate 1.5707 1.5707 => gob rotation: 1.570700 1.570700

----------------------------------------------------

.gps should have its subfixes changed.
Currently: .gps DIRECTION VALUE
How it should be: .gps VALUE DIRECTION

.gps face should also include Nortwest/Southwest/Northeast/Southeast and so on. Not only w/s/e/n

This makes it a lot easier to quickly change the direction by Alt + Arrow up instead of having to change half the command. As someone who builds a lot this would help tenfold and make building in general a lot "nicer".

-----------------------------------------------------

As of the writing of this, the command ".gobject rotate" works as following

.gobject rotate X Y

How it should be:

.gobject rotate X Y Z
To make this easier to understand.
.gobject rotate <Orientation> <Tilt Forward> <Tilt to Side>

This will make the command a ton easier to understand and to use. As of right now Rotating is hard to nearly impossible. (Props/Credit to Matt(Zajru) and Garkes/Melli)

[War-God Matt 67]

No idea about the first, should be looked into at some point.

---

Second, I totally understand your point as a builder myself, but, rather than changing it, if possible, @Azarchius could potentially allow both:
.gps <dir> <value>
and
.gps <value> <dir>

Both can come in handy, it depends on the situation of course.

.gps <dir> <value> is handy for testing the dimensions of stuff, and to quickly move in one direction for large objects and such.
.gps <value> <dir> is handy for moving around a set dimension at all times, i.e, tiles. If you have tiles that are 4x4 yards, then you don't need to switch the value first, but the direction.

---

Thanks for supporting me bby, and using my explanation. :*

[MindScape 66]

3 hours ago, War-God Zajru said:

No idea about the first, should be looked into at some point.

---

Second, I totally understand your point as a builder myself, but, rather than changing it, if possible, @Azarchius could potentially allow both:
.gps <dir> <value>
and
.gps <value> <dir>

Both can come in handy, it depends on the situation of course.

.gps <dir> <value> is handy for testing the dimensions of stuff, and to quickly move in one direction for large objects and such.
.gps <value> <dir> is handy for moving around a set dimension at all times, i.e, tiles. If you have tiles that are 4x4 yards, then you don't need to switch the value first, but the direction.

---

Thanks for supporting me bby, and using my explanation. :*

Good point. Both is good idea

[Azarchius 212]

It works like that now.