Ragolution 0 Posted June 17, 2023 (edited) • Type of Bug: Commands/Engine • Description: When using the .distance command, it does not measure the first 2.34 distance units and instead reads as 0.00. Additional distance disregards this additional space. • Evidence (Chat message/Screenshot): See image. Distance interprets this distance as '0 yards'. • Steps to reproduce: 1. Place an NPC 2. Get close enough for a hug 3. Move away about 2 yards 4. .distance 5. "0.0000" • Expected result: Distance should show the distance from the center of the model. It currently does not even show distance from the edge of the model. • Observed result: Distance offset by an arbitrary value. • Reproduction rate: 100% • Additional information: I liek piza. Edited June 17, 2023 by Ragolution Share this post Link to post
Reinisdm 0 Posted August 2, 2023 Recently I made some tests with this command, and distance is affected by your and targets model size. If you will scale yourself or target to scale 10, then you need to move more far away to get more than 0 in distance. Share this post Link to post
