Firestorm 16 Posted August 20, 2017 (edited) Shield Name: SHIELD_COTSTRAT_D_02STRATHOLME_2b screenie: http://prntscr.com/gaoa71 basically, looking to get this to replace some other shield, and recolored to look like a Scarlet one. Feeling like this shield would look absolutely -badass- as a scarlet crusade shield thanks in advance Edited August 20, 2017 by Firestorm Share this post Link to post Share on other sites
Avalia 45 Posted August 20, 2017 should look like the attached picture. be sure to rename it Shield_CoTStrat_D_02Stratholme.blp Share this post Link to post Share on other sites
Firestorm 16 Posted August 20, 2017 (edited) Can I rename it to anything? Or is this going to replace the current one? Also - I have -no idea- where to place / what to rename it. Also - you're beautiful for this. edit: I just realized that there are actually two shields with the same model/texture in the custom mogit. Still no idea what to do though edit 2: nevermind, somehow I was smart enough to figure out where to put it by creating a new folder and slapping the file in there. edit THREE: okay, I really appreciate this, but how do I get it to replace a different shield that isn't commonly used? I can apply it as a patch myself (with your permission of course) but yeah Edited August 20, 2017 by Firestorm Share this post Link to post Share on other sites
Avalia 45 Posted August 20, 2017 17 minutes ago, Firestorm said: edit THREE: okay, I really appreciate this, but how do I get it to replace a different shield that isn't commonly used? I can apply it as a patch myself (with your permission of course) but yeah you have my permission because that's blizzard's shield, haha, i just put the texture on! i'm pretty sure you just pick a shield that you think nobody will use, then replace the .m2 and .blp files of that shield with the stratholme shield Share this post Link to post Share on other sites
Firestorm 16 Posted August 20, 2017 (edited) 2 minutes ago, Avalia said: you have my permission because that's blizzard's shield, haha, i just put the texture on! i'm pretty sure you just pick a shield that you think nobody will use, then replace the .m2 and .blp files of that shield with the stratholme shield any idea what the .m2 is? and it -all- goes under objectcomponents -> shield right? new to file editing - you might need to send me the .m2 because idk where or how else to get it............. Edited August 20, 2017 by Firestorm Share this post Link to post Share on other sites
Avalia 45 Posted August 20, 2017 7 minutes ago, Firestorm said: any idea what the .m2 is? and it -all- goes under objectcomponents -> shield right? new to file editing i can't get modelviewer or CASCexplorer to work right now, so i don't really have a way of finding the m2 filename or the file path for you. i'm pretty sure it's objectcomponents/shield yeah Share this post Link to post Share on other sites
Firestorm 16 Posted August 20, 2017 4 minutes ago, Avalia said: i can't get modelviewer or CASCexplorer to work right now, so i don't really have a way of finding the m2 filename or the file path for you. i'm pretty sure it's objectcomponents/shield yeah i'll install WMV and see if I can find it by myself if not, i'll come back here and whine but thank you so much for the texture <3 Share this post Link to post Share on other sites
Avalia 45 Posted August 20, 2017 Just now, Firestorm said: i'll install WMV and see if I can find it by myself if not, i'll come back here and whine but thank you so much for the texture <3 sorry i couldn't be more helpful - if you do find it, here's how you would replace it: let's say you wanted to replace a bow with that shield m2 and BLP (don't do this, it's just an example - replace a shield haha). let's say you decide to replace "bow_1h_draenorchallenge_d_01.m2". you would rename the stratholme shield m2 to "bow_1h_draenorchallenge_d_01.m2". then you do the same thing with the blp - the blp you would want to replace in this example is "bow_1h_draenorchallenge_d_0100.blp", so you'd take "Shield_CoTStrat_D_02Stratholme.blp" and rename it to "bow_1h_draenorchallenge_d_0100.blp". all of these files would be in objectcomponents/shield sorry i can't do more, modelviewer won't load my data folder, and CASC explorer won't load at all Share this post Link to post Share on other sites
Firestorm 16 Posted August 20, 2017 6 minutes ago, Avalia said: sorry i couldn't be more helpful - if you do find it, here's how you would replace it: let's say you wanted to replace a bow with that shield m2 and BLP (don't do this, it's just an example - replace a shield haha). let's say you decide to replace "bow_1h_draenorchallenge_d_01.m2". you would rename the stratholme shield m2 to "bow_1h_draenorchallenge_d_01.m2". then you do the same thing with the blp - the blp you would want to replace in this example is "bow_1h_draenorchallenge_d_0100.blp", so you'd take "Shield_CoTStrat_D_02Stratholme.blp" and rename it to "bow_1h_draenorchallenge_d_0100.blp". all of these files would be in objectcomponents/shield sorry i can't do more, modelviewer won't load my data folder, and CASC explorer won't load at all wowmodelviewer isn't opening mine either /shrug it's fine though Share this post Link to post Share on other sites
Avalia 45 Posted August 20, 2017 1 minute ago, Firestorm said: wowmodelviewer isn't opening mine either /shrug it's fine though if you want a temporary fix it'd be easy to replace the blue stratholme shield - you'd just rename it to the blp you included in your original post, and that would work fine. i know you're looking for something people have a low chance of using though Share this post Link to post Share on other sites
Firestorm 16 Posted August 20, 2017 1 minute ago, Avalia said: if you want a temporary fix it'd be easy to replace the blue stratholme shield - you'd just rename it to the blp you included in your original post, and that would work fine. i know you're looking for something people have a low chance of using though got WMV to start working had to close the client first Share this post Link to post Share on other sites
Avalia 45 Posted August 20, 2017 3 minutes ago, Firestorm said: got WMV to start working had to close the client first oh, whaddya know, that worked for me too. im dumb path is item/Objectcomponents/shield/ m2 is called "shield_cotstrat_d_02.m2" Share this post Link to post Share on other sites
Firestorm 16 Posted August 20, 2017 1 minute ago, Avalia said: oh, whaddya know, that worked for me too. im dumb path is item/Objectcomponents/shield/ m2 is called "shield_cotstrat_d_02.m2" okay but I can't actually see the m2, everything is hidden except for the files currently installed from patches Share this post Link to post Share on other sites
Avalia 45 Posted August 20, 2017 1 minute ago, Firestorm said: okay but I can't actually see the m2, everything is hidden except for the files currently installed from patches you can save it through modelviewer - here, i'll attach it shield_cotstrat_d_02.m2 Share this post Link to post Share on other sites
Jerhammer 0 Posted August 20, 2017 Do you know the yellow version of that shield too or just the red.. Just asking out of curiosity. Share this post Link to post Share on other sites
Firestorm 16 Posted August 20, 2017 1 minute ago, Avalia said: you can save it through modelviewer - here, i'll attach it shield_cotstrat_d_02.m2 absolutely amazing is there any chance you can do a yellow version too? my friend is begging for it lol Share this post Link to post Share on other sites
Firestorm 16 Posted August 20, 2017 also my WMV is screaming at me because I have missing DBC files apparently /shrug Share this post Link to post Share on other sites
Avalia 45 Posted August 20, 2017 6 minutes ago, Firestorm said: is there any chance you can do a yellow version too? my friend is begging for it lol i've also attached the .SKIN file because i'm pretty sure you need to replace that Shield_CoTStrat_D_02Gold.blp Shield_CoTStrat_D_0200.skin Share this post Link to post Share on other sites
Firestorm 16 Posted August 20, 2017 (edited) 4 minutes ago, Avalia said: i've also attached the .SKIN file because i'm pretty sure you need to replace that Shield_CoTStrat_D_02Gold.blp Shield_CoTStrat_D_0200.skin the shield im trying to replace is named in-game as SHIELD_WHEEL_B_01_1b i take it that, with the custom mogit using file names, that's what I use for renaming the files I'd try and figure this all out myself but WMV isn't working for me and then for the gold shield I guess i'll use SHIELD_ROUND_A_01ORANGE_2b Edited August 20, 2017 by Firestorm Share this post Link to post Share on other sites
Avalia 45 Posted August 20, 2017 1 minute ago, Firestorm said: the shield im trying to replace is named in-game as SHIELD_WHEEL_B_01_1b i take it that, with the custom mogit using file names, that's what I use for renaming the files I'd try and figure this all out myself but WMV isn't working for me okay, i will look at the filenames for that shield and write out a little guide for you 1. Rename "shield_cotstrat_d_02.m2" to "Shield_Wheel_B_01" (keep it in item/objectcomponents/shield) 2. Rename "Shield_CoTStrat_D_02Stratholme.blp" to "SHIELD_WHEEL_B_01.BLP" (keep it in item/objectcomponents/shield) 3. Rename "Shield_CoTStrat_D_0200.skin" to "Shield_Wheel_B_0100.skin" (keep it in item/objectcomponents/shield) repeat for any other shield you may want to replace with different textures, for your friend Share this post Link to post Share on other sites
Avalia 45 Posted August 20, 2017 also to correct myself, you don't need to add .m2, .blp, .skin at the end of the names - if you do, it will not work. sorry Share this post Link to post Share on other sites
Firestorm 16 Posted August 20, 2017 4 minutes ago, Avalia said: okay, i will look at the filenames for that shield and write out a little guide for you 1. Rename "shield_cotstrat_d_02.m2" to "Shield_Wheel_B_01" (keep it in item/objectcomponents/shield) 2. Rename "Shield_CoTStrat_D_02Stratholme.blp" to "SHIELD_WHEEL_B_01.BLP" (keep it in item/objectcomponents/shield) 3. Rename "Shield_CoTStrat_D_0200.skin" to "Shield_Wheel_B_0100.skin" (keep it in item/objectcomponents/shield) repeat for any other shield you may want to replace with different textures, for your friend using logic im just going to deduct that for the second shield, I'll want to take away the '_2b' at the end and it was pretty self explanatory for the .blp and .m2 but with the .skin, I'm a bit confused. will it be 01Orange00 or 0100Orange or what Share this post Link to post Share on other sites
Avalia 45 Posted August 20, 2017 1 minute ago, Firestorm said: using logic im just going to deduct that for the second shield, I'll want to take away the '_2b' at the end and it was pretty self explanatory for the .blp and .m2 but with the .skin, I'm a bit confused. will it be 01Orange00 or 0100Orange or what Shield_Round_A_01.m2 Shield_Round_A_0100.skin Shield_Round_A_01Orange.blp just pulled up the filenames for that shield, here you go. let me know whether or not it works for you by the way - if it doesn't, i'll just get it to work for me and send it to you haha Share this post Link to post Share on other sites
Firestorm 16 Posted August 20, 2017 8 minutes ago, Avalia said: Shield_Round_A_01.m2 Shield_Round_A_0100.skin Shield_Round_A_01Orange.blp just pulled up the filenames for that shield, here you go. let me know whether or not it works for you by the way - if it doesn't, i'll just get it to work for me and send it to you haha test ended in disaster. http://prntscr.com/gap5c5 heh. here's my folder http://prntscr.com/gap696 Share this post Link to post Share on other sites
Firestorm 16 Posted August 20, 2017 wait, if it's case sensitive then maybe i goofed up and mixed the .m2 casing with .blp Share this post Link to post Share on other sites