Jump to content

Tutorial: Advanced Building

Recommended Posts

TUTORIAL: Advanced Building

This is my tutorial for advanced building in Epsilon. I'll assume you know all the techniques from the earlier Building Basics tutorial. There is no set order to follow here, except for grouping and blueprints. Anything else you can just read and try out on its own. As before, commands will be written down

like this

Parts in brackets <like this> require your own input.

1. Object Groups
2. Blueprints
Special Objects
Object Activation
Tinted Objects
Spell Effects

If any of the steps are unclear, incorrect or incomplete, be sure to leave a reply or contact me on Discord.

1. Object Groups

Object groups are handy to manipulate several objects at once. These could be floor tiles you have placed into a row and want to double in size without having to spawn each one separately. It could be a custom built roof you want to duplicate, or maybe you've heard of blueprints already and want to try making one. Grouping up your objects is where it all begins. For this tutorial, I've decided to make a hammock between two palm trees. 


To build this, find and spawn the following objects:
2x sholazarpalm_tree03.m2
1x hammock01.m2

Make the palm trees smaller (scale 0.1 should do the trick) and rotate the objects to make the hammock more or less like in the picture above. When your creation is ready, it's time to group them. There are several ways to add objects to a group. The important thing to know is that a group always has a main object. When you manipulate the group or spawn a new copy, the main object will always be used as a point of reference. When selecting the group later on, we'll need to approach this main object. In the case of the hammock, we'll settle on making the hammock itself the main object.

To group things to the main object, we can select the -other- objects and either use the [Group] link of the main object for each of them, or we can use

.gob group add <guid>

where <guid> is the guid of the main object, displayed in the chat when you select the object. This method is handy if you want to make a macro for adding objects to a group after spawning them.

In this case, all the objects are already there and there are no other objects around that we'd like to exclude from the grouping. A much faster method would be to select our intended main object (the hammock) and using

.gob group addnear <range>

where <range> is the amount of yards around your character (!) that will be taken into account for adding to the hammock. To add the two trees, we stand next to the hammock and use

.gob group addnear 10

You can always add more objects to a group later, or remove individual ones.


The objects are all lit up, which means we have successfully grouped them. Now let's try a few basic manipulations. These are done with 'gob group' commands instead of 'gob'. With a quick

.gob group copy r 5

we have a second group of trees with a hammock.

The following commands from regular object manipulation all work like with regular objects as long as we use 'gob group':

.gob group sel
.gob group move <direction> <range>
.gob group copy <direction> <range>
.gob group turn <degrees>
.gob group scale <scale>

Note that pitching and rolling can't be done as a group. However, you can still move, roll, scale individual objects without having to reform the group. For instance, we can make the hammock a little bigger or higher without touching the palm trees. The end result is this


Whenever we manipulate a group, the game takes the main object as its anchor. When we turn the group by 180°, we turn the main object and everything around that. This is why I chose the most central object to be the main object. We can always change the mail object by promoting an object that's already part of the group. Select one of the trees and try out

.gob group promote

Objects can only be in one group. To reassign an object to another group, remove it from its current one first. To remove a single object from a group, select the object and use

.gob group remove

To clear a group entirely, select the group and

.gob group clear

Let's go ahead and make these six objects into a new group. We'll clear the second group and add them all to the original hammock with another addnear command.

To delete a group, use

.gob group delete

but let's not get ahead of ourselves. We'll need this group to try making a blueprint.

2. Blueprints

Blueprints save object groups for later use and enable us to spawn them at will. We can also share them with selected users or everyone. To make a blueprint, you need to have a group selected. With our two hammocks and their palm trees selected, we can simply make a private blueprint using

.gob blueprint new <name>

I've chosen the name 'HammockGroup'. Feel free to call it anything you like, but it's advised to take unique names that describe the blueprint in one or two words. After creation, we can already spawn the blueprint on our location with the [Spawn Blueprint] button in the chat. 

When selecting the same group, we can also make use of 

.gob blueprint update <name>

using the name of the blueprint you already had. To delete a blueprint entirely, use

.gob blueprint delete <name>

It's entirely optional, but you can also give your blueprint a description using

.gob blueprint description <name> <description>


Blueprints are automatically shared with all characters of your account. On any character, use 

.lookup blueprint <name>

to find your blueprints using their name. You don't need to use the full name. Just try it with Hammock and you'll already find it. Try spawning it now. To get rid of it again, delete it with the command for deleting groups you've learned in the last section.

To share a blueprint with everyone else, use the following command:

.gob blueprint share <name> <player>

Use 'HammockGroup' as a name, and 'public' as the player. Of course, typing in a specific player name will only share it with that person. To undo the listing of your blueprint to others, you can use 

.gob blueprint delist <name>

This does not remove the objects from players who already spawned your blueprints, however. 


Now all that remains is to be able to look up public blueprints, to find your own and the works of others that you are free to use. A simple

.lookup blueprintpublic <name>

does the trick. With the 

.gob blueprint rename <name> <newname>

I've renamed my own HammockGroup to TwoHammocks and added it to the public repository. Try and find it in the public list and spawn it. Note how you spawn the main object of the group where you stand and the rest around it. You can get rid of it again by deleting it as a group as seen in the first section of the tutorial. As an alternative to spawning a shared blueprint, you can also import it into your own private collection of blueprints by typing

.gob blueprint import <BlueprintID>

You can find the blueprint ID on the left side when looking up blueprints in a list. In the case of the TwoHammocks blueprint, the ID is 5559.


Teleporters are objects that trigger and do something to a player when approached. Apart from teleporting the player, they can do a number of other cool things. Any object can be made into a teleporter. Let's start with our tutorial project: a magical maze! Let's set up the maze first. After doing the following commands, we should be ready to start: 

.tele 1945
.gob sp 875377
.gob m d 17.5


We're ready to make our first teleporter. Spawn an object in the middle of the maze that'll be the goal of the maze and act as a teleporter. I've chosen to put up a 7af_priest_pedestal.m2 with a goldgoblet01.m2 above it. The pedestal will act as a teleporter when you come near.


Turning the pedestal into a teleporter is as simple as 

.gob teleporter on

We'd like to teleport to a different location after the centre of the maze has been reached. To attach a destination we can use 

.gob teleporter add

This will teleport anyone who comes close enough to the place we were standing on when we executed the command, as long as we kept the teleporter selected. I want our maze to end up in Raven Hill Cemetery though and since it's in another part of the world, the teleporter object won't stay selected to do actions on. So to still link the object to the location, we save the GUID of the teleporter and from the location in Raven Hill, we type: 

.gob teleporter add <guid>

Now we have a working teleporter. A quick teleport back to 1945 and a test run later, we see that nothing happens yet when we get close to the pedestal. This is because the default range of a teleporter is quite small and we need to make it bigger. The maximum range is 10, but let's use 5 in this case. After selecting the pedestal, do a

.gob teleporter setrange <range>

If you stand close enough when executing the command, you'll see the effect right away. Excellent, but we're not done yet. Select the pedestal again. We're going to add a delay and an effect to it. We can add an animation to the teleport and a delay to display the animation before the loading screen kicks in. We'll need a spell ID, so let's find one using 

.lookup spell teleport

I've chosen spell ID 8735 for this, so let's go ahead and add it to the teleporter, together with a delay of 350 milliseconds. Use '8735' as id and '350' as duration for the following commands:

.gob teleporter setspell <id>
.gob teleporter delay <duration>

Voilà. We can teleport players from the maze to Raven Hill. But wait, there's more! There is no need for transporting behaviour for a teleporter to work. I've added a 6or_enchanting_tikimask01.m2 to the entrance of the mage and made it a teleporter to apply spell 185394 and nothing more. A creepy mask that makes an unnatural night descend over the maze. Time to get lost! You can get really creative with teleporters. You could add several hard to see traps in the floor that teleport you back to the start of the maze, for instance. You'll discover more creative uses as you play around with them.



Other than transporting players and casting spells on them, teleporters can also activate the object you are approaching. For this, use

.gob teleporter setactive

Of course, this only works on objects that do something when you activate them. Manually activating may screw up the teleporter activation though, so make a sensible choice between automation and using commands when you need them.

Another cool trick a teleporter can do is phase teleporting. This does exactly what it sounds like. It teleports you not only to a location, but into another phase as well. Don't forget to set the phase as well as the destination location in that phase. For phase teleporting, the creator of the teleporter needs member permissions in the destination phase, so you can't just link to anyone's phase without asking and no one will invade yours without your say-so. Adding a phase to the destination of a teleporter is done like this:

.gob teleporter setphase <phaseID>

The GUID of an object won't be enough to identify the teleporter when you're setting the target location. When you set it from the target phase, write the command to set the location like this: 

.gob teleporter add <GUID>@<PhaseID>

So for example: 

.gob teleporter add 1337@26000

You can disable teleporters or clear all the teleporting data with

.gob teleporter off
.gob teleporter clear

Note that teleporting abilities are not saved on objects when you make a blueprint. 


Now let's make a teleporter that actually gives you a choice of where to go. If we add a location to the teleporter with the GUID attached, we only need to add two more things to have the teleporter give us a choice. On this runestone, I've used the following commands:

.gob teleporter on
.gob teleporter setspell 8735
.gob teleporter setrange 5
.gob teleporter delay 350
.gob teleporter add <guid> 1 "First Location"
.gob teleporter add <guid> 2 "Second Location"
.gob teleporter add <guid> 3 "Third Location"
.gob teleporter add <guid> 4 "Fourth Location"
.gob teleporter add <guid> 5 "Fifth Location"
.gob teleporter add <guid> 6 "Sixth Location"
.gob teleporter add <guid> 7 "Seventh Location"
.gob teleporter add <guid> 8 "Eighth Location"
.gob teleporter add <guid> 9 "Ninth Location"
.gob teleporter add <guid> 10 "Tenth Location"
.gob teleporter add <guid> 11 "Eleventh Location"

The numbers 1-11 correspond to icons, the text between quotation marks to the text we want to see as options. This command won't work if you don't use quotation marks. To see what the icons look like, check the next picture. Also note that the spell effect will only trigger when you actually select a teleport location. For some reason, you may have to click twice the first time you use a teleporter that gives you a choice.


Teleporters can be used to automatically open doors as well. To animate a door, you'll need to set a range and apply the command to activate the object as well, but this time, we'll be using the delay to determine how long the door or gate will stay open, up to 30 seconds (but written in milliseconds). Try it out yourself with the following:

.gob sp 253922
.gob tele on
.gob tele setactive
.gob tele setrange 5
.gob tele delay 5000


Another great tool of Epsilon is the ability to set a custom visibility range on objects. The most common use of visibility is to set some larger buildings to be permanently visible, so they don't fade from view when you look at them from a longer distance. Some scaled .wmo objects, like some pillars or ocean tiles, also act up a little when you travel further away from them and come back. Suddenly, it's as if they've forgotten they were scaled at all. Setting visibility to permanent on these is a quick fix to the problem. You can do this by using

.gob set visibility <range>

Use '-1' to make an object permanently visible. Of course, you can also greatly reduce the visibility so that your village looks magically hidden from afar and it's only visible when you move closer. You can also make some creative puzzles with lowered visibility. 

Visibility on objects is saved when making blueprints.

Special objects


There are a few special objects you should know about. You may have heard of Epsilon's terrain_cut object that lets you cut into the world terrain to put in your own caves or mines, basements, half-submerged towers in which you still want the basement available. To spawn a terrain_cut object, use 

.gob sp 874450

or look up the eps_terrain_cut.wmo in the in-game listing. You can place several terrain_cut objects together, but you can also make them bigger by scaling them down(!) using the regular gob scale command. The terrain cutting object doesn't work on objects.


Light sources

To make candles/chandeliers/torches/streetlights/fireplaces or even magical objects emit light, you can use cavelight objects. When you type in

.lo obj cavelight

you'll find 9 different objects, each with a distinct colour. Spawn these inside the object that should emit the light and rescale it. IT's tempting to scale it up to make it more intense, but since walls or other objects don't break the effect, you can end up with candles lighting the outside of a house. In that case, scale down and consider spawning two cavelight objects if the light is too dim. 

Epsilon's own objects

Epsilon also has own versions of existing objects. There are gilnean versions of the human garrison buildings, various recolours for the largest human garrison buildings, and coloured version of existing Elven buildings. Often, the in-game listing will also indicate there's an 'emptywmo' version of a building, without furniture and other clutter. You can't find these in wow.tools, so here are a few pointers:

  • Don't look for exact names with the .wmo suffix in the in-game listing. Try a lookup of '6hu_garrison_townhall_v2.wmo' and compare it with the results of a lookup of just '6hu_garrison_townhall_v2'.
  • Try looking for Night Elf or Blood Elf objects with the 'voidelf', 'royal_bloodelf', 'pristine_nightelf' or 'royal_highelf' prefixes, or do as above and cut the existing prefix and widen the search. Try it out with nightelf_moonwellarge and see if you can find the pristine_nightelf and royal_bloodelf version too. There are also some blood elf building with a 'highelf' prefix. Try finding the typical blood elf guard tower with a blue crystal spire.
  • Try looking for eps_rockarch to see Epsilon-only variations on the rockarches


Macros can be a great help in building. From simplifying setting permanent visibility on selected objects to repeating tasks like selecting and deleting objects, macros can save a lot of time. If you haven't ever made one, do


to open the macro menu. Make a new one by selecting 'New' at the bottom, pick a name and icon and then type in commands in the text field, each one on a separate line. Afterwards, you can drag them from the top of the menu to your action bars. Useful macros are usually little tasks such as:

.gob select

.gob delete

.gob group select

.gob group delete

.gob set visibility -1

.unaura all

Be sure not to load too many manipulations into a single macro. Because the server tries to get them through all at the same time, some may not be saved. It may look fine on your screen, but the next time you log in, you may find some objects missing or out of place. Instead, if you want to do a few manipulations at once, make use of the SlashIn addon we have in the game. This allows you to put a little timer on commands so they don't try to all execute at once. The syntax is:

/in <duration> /g <command>

The duration is the time in seconds to wait before the following command. the addition of  '/g' is required because anything on the '/say' channel is restricted by design to avoid abuse. The following moves an object back by 5 yards and also lifts it 10 yards into the air a second later:

.gob m b 5
/in 1 /g .gob m u 10


Proper movement can be a great time saver when building. Depending on the size of your project, you may have to move around a lot. Looking at things from all angles also makes you see any gaps between objects you are trying to assemble. To move around, most builders don't just walk, but also fly. You can use the 'Epsilon Tool' addon to enable flight and set the flight speed, but you can also use commands. 

.cheat fly on
.cheat fly off

These commands enable and disable flying, and speed is regulated with 

.modify speed fly <speed> 

where speed can be put in a range between 0.1 and 50, with 1 being normal running speed.

Another way of getting around is the gps command. Using the directions similar to the gob move command, you can use

.gps <direction> <distance>

It'll launch you an amount of yards upwards/forwards/etc. This is handy to get out of an object that gets you stuck after spawning or to estimate the dimensions of a space. You can also use it to jump through a wall to take a shortcut, or to get underneath the world terrain.

Macros can help here as well. I don't start building without the following command sets as macros:

.cheat fly on
.modify speed fly 5
.cheat fly on
.modify speed fly 25
.gps f 5

If you want, you can also teleport around the map with a targeted blinking spell. Type in

.learn 29968

to learn a spell that allows you to mark an exact spot to teleport to. You can find it in your spell book, or it binds to your action bar if there's space on it. You need to do this only once per character.

If you find yourself visiting the same places in your phase over and over, you can also set phase teleporters to get around. Using the command

.phase tele add <name>

you can set up such a location. To teleport yourself back to a phase location, use

.phase tele <name>

or make a macro to get there. Forgot a location? Try

.phase tele list


Tiles are objects with unique textures. To build buildings from scratch, tiles are often used as walls, floors or even roofs. They can be used in furniture as well though. The drawback on tiles is that they can't be looked up in a modelviewer. You'll have to find them in Epsilon yourself. There's a broad tile mall that has most tiles, but for the most recent ones or for narrowing down per theme or name, you can also use the in-game functions to find them. You can find all the malls in Builder's Haven:

.ph e 26000

To look up tiles, use the following command:

.lo obj tile <name>

Try it out using 'kultiras' as a name to find some BfA building tiles.

The only way to place down water you can swim around in is with a tile. Wherever you place it, the space below the surface will make a character swim. There are three types of tiles for water, and they can be found like this:

.lo obj watertile <name>
.lo obj laketile <name>
.lo obj oceantile <name>

If you feel like browsing, the name is optional. If you don't give any, you'll just get all the tiles of that type. 

Building tiles come in the following dimensions:
Length: 4
Width: 4
Height: 0.25

This means that for most tiles like stone floors or wooden planks, the command

.gob copy <direction> 4

will place the next one right alongside it, extending the pattern seamlessly. When you scale a tile up or down, remember to apply the same scale to this distance.

You can also place several tiles in a row to save time. If you add a number to the end of the copy command, the copying is repeated this many times. Try out

.gob copy f 4 4

and you'll see a row of 4 new tiles being added in front of the existing one.

Water tiles dimensions are:
Length: 4.166667
Width: 4.166667
Height: 4.166667

Lake tiles dimensions are:
Length: 41.66667
Width: 41.66667
Height: 41.66667

Ocean tiles dimensions are:
Length: 416.6667
Width: 416.6667
Height: 416.6667

Object Activation

Some objects can be activated. This makes door open, or open and close, chests open or special objects glow. The command to achieve this is 

.gob activate
.gob group activate

when selecting an object or object group. This will make the object activate once. If it opens a door that will stay open though, the door will close again the next time there is a server restart. Sometimes we want to activate objects by default. Go ahead and spawn blueprint 6534 with the command:

.gob blueprint spawn 6534

You'll spawn a small globe with a red sphere in the middle. You could activate the globeofazeroth.m2 object manually to get it to show the actual globe, but then you would have to do so after every server restart.

WoWScrnShot_090520_131854.thumb.jpg.8766eec5fae82b372987268b06411eeb.jpg                              WoWScrnShot_090520_131928.thumb.jpg.bd1f1c4cb0e149b47f2f012b81c443b1.jpg

To make activation permanent, get the GUID of the object and use it in the following command:

.gob activate <GUID> permanent

To avoid a hassle, you can insert the GUID by clicking the [Copy GUID] link after selecting the globe. 

Coloured Objects

Let's break the night with colour! We can recolour objects as long as they are m2 objects. Let's spawn a 7ti_titan_throne01.m2 and get to recolouring. 

a2.jpg.dcf143de32d872943aa4353e0cbf90ea.jpg                              a1.jpg.6a193407f544caf879c3fef621e55446.jpg

To make an object take on a colour, we'll use the command:

.gob tint <Red_value> <Green_value> <Blue_value> <Transparency>

To make it completely red, you'd use 

.gob tint 100 0 0 0

The numbers you use are percentages, working with increments of 5. That meant that there's no difference between setting a red value of 23 or 25. Be sure to always use a transparency of 0 if you just want to change the colour. Increasing the transparency will make the object more see-through. To apply this effect without any colour changes, use

.gob tint 100 100 100 <Transparency>

This is also a percentage. The outcome of our throne with 

.gob tint 100 100 100 50

is the following:


Groups can be recoloured as well! Just replace the initial gob command:

.gob tint <Red_value> <Green_value> <Blue_value> <Transparency>
.gob group tint <Red_value> <Green_value> <Blue_value> <Transparency>

To reset the tint of an object, use one of the following

.gob tint -1
.gob group tint -1

Spell Effects

We can also apply a spell effect to objects. with a simple 

.gob spell <spell_ID>

we apply a spell's visual effect to an object. The effect repeats by itself to stay active. Let's find a simple effect using 

.lo spell glow

I've found a spell called Yrel's Glowy Aura, rank 1. Try it out on a goldgoblet01.m2 by using

.gob spell 160956

to give it a magical glow. 


Only one spell effect can be applied to an object at a time, but with invisible or half-transparent objects, you can get really creative stacking spell effects. Do note that when using the recolouring option on objects, spell effects are erased.


Share this post

Link to post
Share on other sites

Hi! thanks in advance for your work. Also, i would like to notice that the link for the colour chart is not working. ?

Share this post

Link to post
Share on other sites

Hi! Thank you for the guide, although I just tried setting up a multi-options teleporter using your set of commands, and it didn't work: the object that's an epsilon teleporter (which I made sure of using the info and list commands) isn't clickable!

Share this post

Link to post
Share on other sites

I was today years old when I realized that the maze and the goblet was a Harry Potter reference, guy truly committed to the bit.

Share this post

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

  • Recently Browsing   1 member